Achronix Bitporter Bedienungsanleitung PDF herunterladen (Seite 28)

Bitporter Connection Errors Connecting the Bitporter Pod

PAGE 22

www.achronix.com Bitporter User Guide

“USB read error. <reason>”

The Windows driver returned an error from a read operation. The Windows error text

follows.Thiserrorcanoccuriftheunitispowereddownorunpluggedduringoperation.

“USB write error. <reason>”

The Windows driver returned an error from a write operation. The Windows error text

follows.Thiserrorcanoccuriftheunitispowereddownorunpluggedduringoperation.

"No available Achronix Bitporter products with matching serial number found

on USB port."

InenumeratingthevarioushardwareattachedtotheUSBport,atleastoneAchronixBitporter

podwasfoundbutthepodwiththespecifiedserialnumberwasnotfou n dorwasalreadyin

use. Check the serial number (be sure to enter it exactly as  shown on the serial number

sticker),then

checktheconnectionandbesurethePOWERLEDisilluminatedbeforestarting

the software.See“Bitporter Pod NamingConventions”in Chapter4–Usingthe Achronix

STAPLPlayerformoredetails.

Ethernet Connection Errors:

Thereareanumberofnetwork‐relatederrormessagesthatcanoccurduringtheTCP/IPand

Ethernetsetupprocessandoperation:

"No available Achronix Bitporter products with matching serial number found

on local subnet."

The program attempted to connect to an Ethernet pod specifying a serial number (e.g.

“net40XXX”),andnoAchronixBitporterpodwithamatchingserialnumberwasfoundonthe

local subnet. Check the connection and ensure that the COMM LED has  finished blinking

(after power‐up) before starting the software. If the

pod’s TCP/IP settings were manually

configured,verifythattheprovidedsettingsarecorrect.VerifywiththeSystemAdministrator

thatthepodisonthesamelocalsubnetasthePCatte mptingtoconnect.See“BitporterPod

NamingConventions”inChapter 4 – UsingtheAchronixSTAPLPlayerformoredetails.

"No available Achronix Bitporter product found at supplied network address."

TheprogramattemptedtoconnecttoanEthernetpodspecifyinganIPaddressbutnoBitporter

pod was found at that address. Check the connection and ensure that the COMM LED has

finished blinking (after power‐up) before starting the software. If the pod’s TCP/IP settings

weremanuallyconfigured,verifythatthe

providedsetting sarecorrect.Ifthepodisconfigured

touseDHCP,verifywiththeSystemAdministratorthatthenetworkaddressiscorrect.

"Network device is not an Achronix Bitporter pod."

Theprogramattemptedtoconnecttoapodatthesuppliedaddress,butthehardwareatthat

locationdoesnot appeartobeaAchronixBitporterpod.VerifytheIPaddressofthedesired

podandthatthecorrectaddresswasspecified.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 49 50

Keine Kommentare

Achronix Bitporter Bedienungsanleitung Seite 28